Controlling Cockleburs & Sesbania in Browntop

This forum is for general discussion that doesn't fit in the other topic-specific forums.
okieguide
Regular
Posts: 38
Joined: Thu Jun 30, 2005 7:50 am
Location: Denison, Tx

Controlling Cockleburs & Sesbania in Browntop

Postby okieguide » Wed Sep 06, 2006 1:48 pm

I got around 40 acres of browntop that is 2 weeks old. It is about 3" tall right now. What should I use to control the cockleburs and when is the browntop old enough for me to spray. Thanks!
hawkeye
Veteran
Posts: 512
Joined: Wed Jun 20, 2001 12:01 am
Location: Mississippi

Postby hawkeye » Wed Sep 06, 2006 11:27 pm

2,4-D will control these weeds in the browntop. Careful which formulation you use, as it will "get up and walk" with higher humid days. Cotton DOES NOT like 2,4-D at all.
okieguide
Regular
Posts: 38
Joined: Thu Jun 30, 2005 7:50 am
Location: Denison, Tx

Postby okieguide » Thu Sep 07, 2006 7:58 am

How far along does the millet need to be before spraying or does it matter? Also is best to spray the cb's now or let them get larger?? Thanks!
User avatar
SB
Duck South Addict
Posts: 1533
Joined: Mon Jun 18, 2001 12:01 am
Location: Brandon,MS

Postby SB » Thu Sep 07, 2006 8:43 am

In general, the younger the weed the easier it is to kill it. The browntop should be fine to spray now. AIM is another chemical that will work. It is more expensive than 2,4D but does not drift like 2,4D. I would use 2,4D if drifting was not a concern.
Scott Baker
okieguide
Regular
Posts: 38
Joined: Thu Jun 30, 2005 7:50 am
Location: Denison, Tx

Postby okieguide » Thu Sep 07, 2006 12:01 pm

thanks for the info. Do you have any idea ounces per gallon of 24D I should use. Thanks
hawkeye
Veteran
Posts: 512
Joined: Wed Jun 20, 2001 12:01 am
Location: Mississippi

Postby hawkeye » Thu Sep 07, 2006 10:39 pm

I have caused jap millet to lodge with a high rate of 2,4-D, so I would let the millet get a little size on it, although a normal rate won't hurt it. What are you spraying the millet with..i.e. 3 gal sprayer, four wheeler with boom, high boy, plane? When I put 2,4-D in a 3 gal sprayer, I usually use a good "glug". Aim would probably be out of the question if you're in a beaver slough or something, it would cost too much and you would have to buy way more than you need. D will probably be your best bet.
okieguide
Regular
Posts: 38
Joined: Thu Jun 30, 2005 7:50 am
Location: Denison, Tx

Postby okieguide » Fri Sep 08, 2006 5:27 am

with a 4 wheeler and a 10' boom!
hawkeye
Veteran
Posts: 512
Joined: Wed Jun 20, 2001 12:01 am
Location: Mississippi

Postby hawkeye » Fri Sep 08, 2006 7:32 pm

You probably need to get someone to help you calibrate it if you don't know how, you have to know how much water you're putting out and how fast you're going and how much chemical to put in the tank.
mf
Posts: 1
Joined: Wed Jan 18, 2006 5:43 pm

Postby mf » Tue Mar 20, 2007 2:16 pm

Spray with 24D - since brown top is in the grass family it will not be effected by the 24D
Tgrindlay
Newbie
Posts: 12
Joined: Thu Jun 30, 2005 12:08 pm
Location: Seymour, IN

Postby Tgrindlay » Tue Mar 20, 2007 5:13 pm

I use 6-7 oz of 2-4-D in a 15 gallon tank. I knocks the $#!+ out of cockleburrs.
hawkeye
Veteran
Posts: 512
Joined: Wed Jun 20, 2001 12:01 am
Location: Mississippi

Postby hawkeye » Tue Mar 20, 2007 8:54 pm

I was told one time that 2,4-D would make some of the grasses, namely millet, lodge if sprayed at a high enough rate. I didn't believe it. So I tried for myself, and sure enough, it WILL make it lodge if sprayed at high rates.
SWAG
Duck South Addict
Posts: 3209
Joined: Tue Nov 18, 2003 1:07 pm
Location: TALLAHATCHIE COUNTY

Postby SWAG » Wed Mar 21, 2007 8:31 pm

Can also cause some problems if the plant is into the reproductive stage. There are a number of herbicides that will work on a wide rande of broadleaf weeds in millet or other grasses, just make sure you are "on label" when applying.
Are we gonna get wet?

Who is online

Users browsing this forum: Amazon [Bot] and 7 guests