what choke for hevi-shot loads

[cockandlock25]

Does anyone shoot 3 1/2" hevi-shot? What choke do you use? I'm just doing a little research to figure out which one to go with. I have either #5's or #6's.

[H20 Fowl]

I get a better pattern at 40 yards with 3" hevi shot than 3 1/2 ......Im putting it through a jelly head choke tube, shooting #5's

[slave601]

Jellyhead for remingtons and rhinos for everything else

[GordonGekko]

If money is an object, jellyhead will do great...but, I not go with Indian Creek.... 3" loads work slightly better in my experience too...

[LawDawg]

I shoot a ruger red label and trulock chokes pattern really well for me.

[GordonGekko]

Nothing wrong with trulock, I use them in my duck guns, what constriction are you using?

[H20 Fowl]

FYI..... my factory full patterns better than a rhino through my beretta.

[DUCK-HUNT]

I use a jellyhead in my SBE with 3 1/2" 2 1/4oz 6s.....

[GET-N-RITE]

Indian Creek

[Johnny Hall]

Hevi shot markets a choke especially for use with Hevi Shot
I have one and it shoots better out of my SBE 2 than anything else I've tried

282 pellets in a pie plate at 40 yards with 3.5" Hevi 13
198 in a pie plate at 40 yards with 3" #5 Winchester supremes

[LawDawg]

Nothing wrong with trulock, I use them in my duck guns, what constriction are you using?

.04 in the top barrel and .065 in the bottom.

[cockandlock25]

Think I'm gonna go with a jellyhead. It's a lot cheaper than the rest and I have had way more people to tell me to get one than any of the others. If it doesn't pattern well, I haven't lost too much money.

[GordonGekko]

Yep, good starting point. The nice thing about Rhino and Indian Creek is if you aren't getting the pattern you want they will work with you on getting a choke that patterns like you want...but they are twice what a jellyhead costs, and that jellyhead is plenty good for most stuff...and seriously get a box of the 3" 2oz 6's I think you will like them better than the 3.5's....

[hdforester]

FYI..... my factory full patterns better than a rhino through my beretta.

So have you found a tube that works well with the hevi13 in your Beretta (Extrema?). With all the different tube, gun, shell combinations, it is a pretty challenging to find a starting point. Have any of you Extrema owners found that outstanding combination? Been shooting the hevi13 #6 out of the factory tube but looking to tighten it up a bit.

[jdbuckshot]

Think I'm gonna go with a jellyhead. It's a lot cheaper than the rest and I have had way more people to tell me to get one than any of the others. If it doesn't pattern well, I haven't lost too much money.

it will pattern!

if it doesen't i will let you shoot my 10 ga.