Outboard size for River hunting??

This forum is for general discussion that doesn't fit in the other topic-specific forums.
sharpshooter
Regular
Posts: 25
Joined: Tue Jul 17, 2001 12:01 am
Location: Memphis, TN

Outboard size for River hunting??

Postby sharpshooter » Thu Aug 21, 2003 7:49 pm

To some of you with experience hunting ducks on the MS River..... what size outboard is needed/recommended? I'll be using a 17' jon V-hull. I'd rather have a tiller, but it's only rated for 50 hp. I can get 80 hp with a console/steering wheel. Is the extra hp really needed?
Last edited by sharpshooter on Thu Aug 21, 2003 8:09 pm, edited 1 time in total.
User avatar
ducman77
Duck South Addict
Posts: 2846
Joined: Sun May 19, 2002 12:01 am
Location: Winona

Postby ducman77 » Thu Aug 21, 2003 7:53 pm

depends on the size of the boat but I would not get in the Mississippi River with out at least a 50hp
shoot'm in the lips
Don Miller
Duck South Addict
Posts: 6430
Joined: Wed Nov 07, 2001 1:01 am
Location: Holcomb/Money, MS
Contact:

Postby Don Miller » Thu Aug 21, 2003 8:49 pm

You should be okay with a 50hp as long as you are not hunting 20 miles from the boat ramp.
User avatar
SoftCall
Duck South Addict
Posts: 2497
Joined: Wed Oct 31, 2001 1:01 am
Location: MS, TX, OK, CO

Postby SoftCall » Thu Aug 21, 2003 9:39 pm

Back in the day (with some fellow members) we used to run the river with a 25 on a 15ft all welded modified v. That was high falootin' because we were used to hunting big water lakes and certain Brakes (not to be mentioned here) with 5's, 6's, and an occasional borrowed 9.9 slapped on the back of a tin can (I still have mine).

I wouldn't get near that big ditch without at least a 17ft all welded boat with a 50 these days...but I have been accused of being risk averse in my old age.

Tiller is the way to go period. Ask Wildfowler and MC what they think of a a 50 merc tiller with electric tilt.
run me out in the cold rain and snow
quack fiend
Veteran
Posts: 677
Joined: Sat Aug 31, 2002 1:19 am
Location: liberty,ms--where men are men & cows are nervous

Postby quack fiend » Fri Aug 22, 2003 3:38 am

ok, i'll bite---why the tiller preference? the electric tilt is obviously a plus, but after using a console steer 40 last season i can't imagine going back to tiller--also, i run an old monark riveted jon, what does being all-welded help? thanks in advance
you did put in the plug, right?
fivemile
Veteran
Posts: 411
Joined: Tue May 27, 2003 8:12 pm
Location: Vicksburg

Postby fivemile » Fri Aug 22, 2003 5:16 am

You may be running the river to get where you are going to hunt; but don't forget you will actually be hunting in the shallows where you will need to frequently pick up the motor and clean thrash off the prop.
Ramblin Rogue
Regular
Posts: 32
Joined: Fri Dec 13, 2002 11:43 am
Location: Memfrica, TN

Postby Ramblin Rogue » Fri Aug 22, 2003 8:01 am

I have been hunting on that river "around" Memphis since I was little with my father and now on my own. I will be honest, if I had my way I would pull a shallow water boat with a pontoon boat. I am serious, that river will keep you awake. All of the tails that you have been told about goings on with that water is true. But to answer your question, I use a 1650 Xpress with a Yamaha 40hp Console with tilt and trim. It is the smallest that I wanted to put on the big water while not being to big for the shallows. However, I try to only cross the river. I do not joy ride on the thing. The question for you is how much gear are you taking? If you put four people, four bags of decoys, four guns, a dog, ... in the boat that current is going to work anything less than a 50hp. Look in to the pontoon though, sometimes you can find them CHEAP and use your woods boat for the shallows.

P.S. If you can figure the river out in your area, you WILL hammer the birds. Timing is everything. I have been hunting it for 12 years and it still amazes and scares the hell out of me!
I aint no sportsman, I'm a killa!
User avatar
laduck
Veteran
Posts: 860
Joined: Sun Apr 29, 2001 12:01 am
Location: Slidell , La. , St. Tammany
Contact:

Postby laduck » Fri Aug 22, 2003 8:30 am

From the times that we have hunted on the big river, I have one bit to offer. Make sure that you have another motor with you. Don't go out there without a kicker. :( :( :(
Shoot them sprigs on their first pass!
User avatar
Jeff
Duck South Addict
Posts: 5298
Joined: Mon Jun 18, 2001 12:01 am
Location: Covington, La

Postby Jeff » Fri Aug 22, 2003 4:31 pm

Best boat I have ever seen to hunt the river bar none had a 175 on it. It is a custom 22' semi v w/ radar stand on transom area of boat. Then off the radar stand has two winches to lift up two 14' fiberglass pirouges w/ flat backs and 5.5 hp. go devil's on them. There is a large platform on the front and completely open boat other than a side steering wheel in the back and two seats to the side of it. It is capable of hauling two four wheelers, the two pirogues I mentioned earlier, and four hunters from Venice to the mouth of South pass (about 15 mi) safely in fog and most weather conditions. I woudln't get on the river down here without a big boat like 18' or bigger and a 130 or so outboard that was very reliable, just too much boat traffic and that thing can get scary real quick with fog or a change in weather.
User avatar
booger
Veteran
Posts: 976
Joined: Mon Jun 18, 2001 12:01 am
Location: North of Shucktown, M'sipi

Postby booger » Fri Aug 22, 2003 7:11 pm

I thought I was going to hunt it in a 15 foot boat and a 20hp motor but I got out on it, looked around and thought sheeeeeeeeet. I scurried back to the boat ramp like an armadillo being popped with .22's.
Them ducks is wary. We now resume our regularly scheduled forum melee in progress.
User avatar
TODO
Duck South Addict
Posts: 2389
Joined: Sat Nov 30, 2002 9:10 pm
Location: Prentiss Bar

Postby TODO » Sat Aug 23, 2003 2:32 pm

I run the river in a 1542 with a 40 console. I wouldn't get much smaller than that.
00ducksr.
Regular
Posts: 62
Joined: Fri Sep 20, 2002 12:26 pm
Location: memphis tn.

Postby 00ducksr. » Tue Aug 26, 2003 12:17 pm

not trying to tell you what to do but if you are having these kinds of question, the first thing you should do is find a person who knows the river and get with them and be shown the in's and out's. then worry about the boat size. good luck the river in the dark won't give you a 2nd chance.
esteslanehunting
Veteran
Posts: 132
Joined: Mon Dec 23, 2002 9:35 am
Location: west tennessee

Postby esteslanehunting » Tue Aug 26, 2003 1:55 pm

I hunt the Miss. River as much as anyone. I am on the Miss. River at least 4 times a week fishing for strippers or catfish. I use a 1754 War eagle w/ a 50 Yamaha Tiller handle. I have hunted out of boats on the river from a 1448 w/ a 25 Johnson to a 2060 w/ 115 hp Merc. I personally like the 1754 that I hunt out of now. If you know what your doing on the river, you will be fine w/ anything from a 30 hp or above. All depends on how far you will travel hunting on the river. JUST RESPECT THE BIG RIVER AND NEVER OVERLOAD OR GET IN A HURRY!!
GulfCoast
Duck South Addict
Posts: 9703
Joined: Fri Apr 27, 2001 12:01 am
Location: Pascagoula, MS

Postby GulfCoast » Tue Aug 26, 2003 2:22 pm

If I were hunting on the MS River I would hang as much motor on the boat as would be safe. The big trick is to not overload your boat. I have had the crap scared out of me on the river in a 16 foot boat with a 40 horse, but I don't run the thing every day.
So many ducks, so little time....

HRCH (500) UH Ellie Mae MH (2005-2017)
HRCH Tipsy MH
Zsa-Zsa Puppy
User avatar
Wildfowler
Duck South Addict
Posts: 4866
Joined: Fri Jun 29, 2001 12:01 am
Location: Mis'sippi

Postby Wildfowler » Tue Aug 26, 2003 4:46 pm

And always WEAR you life vest when out on the Ol' Man.
driven every kind of rig that's ever been made, driven the backroads so I wouldn't get weighed. - Lowell George

Who is online

Users browsing this forum: No registered users and 10 guests