Crappie Guys and Depth finders

This forum is for general discussion that doesn't fit in the other topic-specific forums.
User avatar
torch
Duck South Addict
Posts: 4416
Joined: Thu Nov 29, 2001 1:01 am
Location: booga bottom, ms
Contact:

Crappie Guys and Depth finders

Postby torch » Thu Feb 17, 2005 7:59 am

What kind of depth finders do ya'll use. I was looking at the new Lowrance with GPS & WAAS. Basspro has one on sale for 649.00 was 1049.00. Do any of ya'll use this type and if so are they worth the extra bucks?
Don Miller
Duck South Addict
Posts: 6430
Joined: Wed Nov 07, 2001 1:01 am
Location: Holcomb/Money, MS
Contact:

Postby Don Miller » Thu Feb 17, 2005 8:11 am

Truthfully, I use a jig pole to tell the depth. It works well up to 11 feet deep. :wink: I bought a $100 depth finder/fish finder 4 years ago. I soon found out that the jig pole was more reliable.
"I'd still like to stick that shotgun up a mallard's as$ and pull the trigger!"---FRITZ RUESEWALD @ 93 years old...(The Arkansas Duck Hunter's Almanac, pg.91)
tunica
Duck South Addict
Posts: 3488
Joined: Thu Dec 05, 2002 7:23 am
Location: Tunica or Olive Branch

Postby tunica » Thu Feb 17, 2005 8:33 am

Don Miller wrote:Truthfully, I use a jig pole to tell the depth. It works well up to 11 feet deep. :wink: I bought a $100 depth finder/fish finder 4 years ago. I soon found out that the jig pole was more reliable.


I agree, I use a depth finder to get a idea of water depth as I pass over it but once I get close to where the fish should be I use a pole, Now I dont fish in deep water as a rule under 12' mostly so I've adapted to using a pole. a 10' jig pole works wonders
one more pass
Veteran
Posts: 356
Joined: Wed Mar 13, 2002 1:01 am
Location: Brandon,MS

Postby one more pass » Thu Feb 17, 2005 8:46 am

Torch I just went through the same process of trying to determine what to get for the front of my boat. After talking to some of the older wiser guys in the crappie club I went with a Garmin 120. It has all kinds of features one being a temp display. I was told that all you really needed in a depth finder for was depth and temp. The fish finding aspect of the thing is misleading. The radar it puts off only covers a small portion of the water being fished. Putting alot of money in something that will eventaully go bad didn't seem wise. I'm sure you use a hand held GPS already for hunting why buy another. The Garmin 120 was around $130 and seems to work great.
tunica
Duck South Addict
Posts: 3488
Joined: Thu Dec 05, 2002 7:23 am
Location: Tunica or Olive Branch

Postby tunica » Thu Feb 17, 2005 9:09 am

yea but hes trying to spend those millions he makes from guiding...... :shock:
User avatar
DUCKAHOLIC
Duck South Addict
Posts: 5746
Joined: Tue Jun 19, 2001 12:01 am
Location: At your house eating cookies and milk
Contact:

Postby DUCKAHOLIC » Thu Feb 17, 2005 9:46 am

A fish/depth finder is a must when crappie are hanging on the edges of river channels. It is the only way to keep the boat on the edge. When fishing the BIG Rez the fish may be 17 to 20 ft.
Life's too damned complicated to make it too damned complicated
User avatar
torch
Duck South Addict
Posts: 4416
Joined: Thu Nov 29, 2001 1:01 am
Location: booga bottom, ms
Contact:

Postby torch » Thu Feb 17, 2005 9:48 am

I am trying to find one that will read dropoffs and ledges. If I can find water temps that differ 1 to 2 degrees in the winter time that is where I usually fish. I fish the bigger lakes in the summer, trolling mostly and I need one that has a better greyline then the one I am currently using.
one more pass
Veteran
Posts: 356
Joined: Wed Mar 13, 2002 1:01 am
Location: Brandon,MS

Postby one more pass » Thu Feb 17, 2005 10:32 am

The Garmin 120 i got works great for that Torch. There is a feature that lets you adjust the greyline depending on the type bottom the lake has. The transducer also comes where you can mount it on the trolling motor or on the back of boat. Also i have been yold that in years past if a transducer was mounted on the trolling motor you may get interference from it on the screen, but i have been told that this problem has been fixed.
User avatar
MUD DUK
Veteran
Posts: 674
Joined: Thu Jan 13, 2005 8:38 pm
Location: Gateway to the Delta, MS

Postby MUD DUK » Thu Feb 17, 2005 9:08 pm

Don Miller wrote:Truthfully, I use a jig pole to tell the depth. It works well up to 11 feet deep. :wink: I bought a $100 depth finder/fish finder 4 years ago. I soon found out that the jig pole was more reliable.


Mr. Miller has an 11 ft pole that is more reliable than an electronic device :shock: :shock: :oops:
tunica
Duck South Addict
Posts: 3488
Joined: Thu Dec 05, 2002 7:23 am
Location: Tunica or Olive Branch

Postby tunica » Fri Feb 18, 2005 6:50 am

MUD DUK wrote:
Don Miller wrote:Truthfully, I use a jig pole to tell the depth. It works well up to 11 feet deep. :wink: I bought a $100 depth finder/fish finder 4 years ago. I soon found out that the jig pole was more reliable.


Mr. Miller has an 11 ft pole that is more reliable than an electronic device :shock: :shock: :oops:


I aint using Don's pole period I have My own 11 footer...but I will bet on the accuracy of a pole verses a electrical device anyday...
Cause if I'm measuring the depth of a hole I want to know if 2x4's are needed :twisted:
User avatar
RebelYelp
Duck South Addict
Posts: 4015
Joined: Fri Aug 30, 2002 8:49 am
Location: Summit, Ms
Contact:

Postby RebelYelp » Fri Feb 18, 2005 8:19 am

just take dukbum with ya, i hear dat boy loves to swim :shock:
Sun rise in the east.... and it sets up in the West, yes the sun rise in east baby, and it sets up in the west..... It's hard to tell, hard to tell, hard to tell, which one, which one I love best.....
User avatar
torch
Duck South Addict
Posts: 4416
Joined: Thu Nov 29, 2001 1:01 am
Location: booga bottom, ms
Contact:

Postby torch » Fri Feb 18, 2005 2:45 pm

I'll just use my Willy Wonka but man those catfish hurt when they latch on :D :D
User avatar
MUD DUK
Veteran
Posts: 674
Joined: Thu Jan 13, 2005 8:38 pm
Location: Gateway to the Delta, MS

Postby MUD DUK » Fri Feb 18, 2005 2:56 pm

Tunica said........Cause if I'm measuring the depth of a hole I want to know if 2x4's are needed


:lol: :lol:
User avatar
drake99
Newbie
Posts: 14
Joined: Sun Jan 09, 2005 11:20 am
Location: clarke co., alabama

Postby drake99 » Sun Feb 20, 2005 8:00 am

Raymarine, Check out there site. They make very fine equipment, look at the HD units in color. Raytheon is the parent company they make all kind of high tech sh*t . A lot of off shore fisherman use these and now they are making units for inshore and not as expensive. Alot of fisherman think they are better than lowrance, I'll let you figure that one out. I like both. drake99
Daddy.....are we there yet?

Who is online

Users browsing this forum: Amazon [Bot] and 18 guests