Page 2 of 2

Re: Permanent Blind Setting 4x4 Pilings

Posted: Wed Aug 31, 2016 5:41 pm
by Barq's
Nothing wrong with a blind...especially when its really bad weather and you have a heater handy with some eggs on the grill. Some of my best hunts were out of an 8' X 20' floating blind that started very, very weak and we were there when the ducks finally decided to come back to open water...10:30 - 1pm. A lot of hunts we never fired the gun till close to 11 and a blind allows you to shoot the bull while waiting for prime time.
Make sure we get some pics...good luck
Barq's

Re: Permanent Blind Setting 4x4 Pilings

Posted: Thu Sep 01, 2016 7:13 am
by GET-N-RITE
There isn't much like standing in the trees and killing ducks, but you aren't going to hunt where I do and stand by a tree. We usually hunt all day or at least till 3. I can't count how many times we have a blind full. Everyone eats breakfast and leaves. 12:30-2:00 we limit out and haven't fired a shot before then. We built a new permanent blind last year, but it's probably a little more than most folks are used to.

viewtopic.php?f=1&t=119531&hilit=BLIND

Re: Permanent Blind Setting 4x4 Pilings

Posted: Fri Sep 02, 2016 8:46 pm
by teul2
Find an old cheap pontoon boat and rebuild it into a blind.

Re: Permanent Blind Setting 4x4 Pilings

Posted: Mon Oct 03, 2016 7:24 pm
by sondance
We used a driver for our docks and stood in the back of a John boat. That is man work driving 4x4's so bring buddies. The bracing is what makes it

Re: Permanent Blind Setting 4x4 Pilings

Posted: Mon Oct 03, 2016 7:26 pm
by sondance
We used a driver for our docks and stood in the back of a John boat. That is man work driving 4x4's so bring buddies. The bracing is what makes it

Re: Permanent Blind Setting 4x4 Pilings

Posted: Mon Nov 28, 2016 2:58 pm
by DeadTurtleCreek
Thank you guys for all the help. We ended up using a combination of support methods to hold it up. I had several 8'x2 3/4" hardened steel pipes laying around that were used to help hold it up. The width of them was perfect because standard axle-to-leaf-spring u-bolts fit them perfectly and are easily found at any auto parts store. They are a big help in giving the blind horizontal support (keeping it from wanting to slide or lean in one direction). I think we could have used only them for vertical support but I'm still not sure. Several 4x4 semi-rounded (flat on two sides) wood posts were also driven into the ground to add vertical support. All of this was done using a sledge hammer because somehow my manual pile driver used in the past had a dent in it we couldn't get out.

We kept the original size as planned 6'x24'. It has turned out to be a great size given that we wanted to be able to hunt 8 without a problem. So far we have hunted 7 together with plenty of room and stability hasn't even been a question with all that weight (over 1,300 pounds just from the 7 guys).

Here are some pictures to give anyone else looking for ideas some thought as to how it was done. The metal posts were hammered in the ground and then the u-bolts were put around the posts and tightened on to the main frame's 2x6. We've killed 59 birds out of it so far this year and hoping for more ducks to come down after the split. Still needs more brush, especially on the roof, but it has been working pretty well.

Re: Permanent Blind Setting 4x4 Pilings

Posted: Tue Nov 29, 2016 7:56 am
by novacaine
What is the decking............odd looking boards? I like it though.

Re: Permanent Blind Setting 4x4 Pilings

Posted: Wed Nov 30, 2016 6:23 pm
by Barq's
Great looking blind....
Barq's

Re: Permanent Blind Setting 4x4 Pilings

Posted: Sun Dec 04, 2016 8:30 pm
by GAHEEL83

Re: Permanent Blind Setting 4x4 Pilings

Posted: Wed Dec 28, 2016 11:12 am
by DeadTurtleCreek