Page 1 of 3
Cree 20" LED bar installed
Posted: Thu Sep 11, 2014 7:17 pm
by skywalker
All I say is 'wow'......this throws a beam! Excellent addition to the JD. Next up, my Ranger.
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 6:42 am
by Tedl10
Looks good and I'm sure will serve its purpose. Now you need one for the back and sides! I just installed at 12" on the bow of my boat and plan to do the same for the ranger.
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 6:44 am
by skywalker
Yeah, it has a 'alternate light' splitter. Thought about a 2"X4" as a backup light.........
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 9:07 am
by Hooded Merganzer
What's the cost of these?
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 9:38 am
by bigoak
With that you can just do all your disking and planting at night when it is cooler.
How did you wire it? Directly to the battery or through the tractor electrical?
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 10:17 am
by skywalker
Approx $65 for light and wiring harness. Wiring comes with a relay that I tapped into the head lights. It has a switch that I mounted on the dash. If you wire straight to the battery, the switch constantly pulls power. The draw is less than my headlights........
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 11:00 am
by bigoak
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 12:22 pm
by skywalker
No, lights have to be on to activate the switch. Push ON, OFF for LED.
Re: Cree 20" LED bar installed
Posted: Fri Sep 12, 2014 3:48 pm
by deltadukman
Re: Cree 20" LED bar installed
Posted: Mon Sep 15, 2014 12:34 pm
by BBR12
I have had 2 standard K/C style light on my roll bar for several yrs. I tied mine in to the hi beam so if I can run with just the tractor lights on low beam or go to high beam and get roll bar lights too. Mine also has a quick connect at the light so I can un-plug either the front or the back lght if I want too.
Re: Cree 20" LED bar installed
Posted: Tue Sep 16, 2014 12:47 pm
by skywalker
6" ordered for the Ranger. 2 2X4 lights ordered, 1 for Ranger and 1 for JD as backup lights.......will let you know results.
Re: Cree 20" LED bar installed
Posted: Wed Sep 17, 2014 4:34 am
by 1010
Where are you ordering these LEDs from ?
Re: Cree 20" LED bar installed
Posted: Wed Sep 17, 2014 7:42 pm
by skywalker
Amazon.com
Re: Cree 20" LED bar installed
Posted: Thu Sep 18, 2014 8:06 pm
by Tedl10
21" for my ranger came in today. Waiting on the other 2x4 kit to come in for side and rear lights before I start installing and wiring.
Re: Cree 20" LED bar installed
Posted: Fri Sep 19, 2014 7:34 am
by teul2